Garage Door Torsion Springs

Torsion Springs

How to measure your springs      Order your springs here  
Spring Wire Chart
Length of 10 Coils
Length of 20 Coils
Wire Size
1 1/4"
2 1/2"
.125
1 3/8"
2 3/4"
.135
1 7/16"
2 7/8"
.142
1 1/2"
3"
.1483
1 9/16"
3 1/8"
.1562
1 5/8"
3 1/4"
.162
1 11/16"
3 3/8"
.170
1 3/4" 3 1/2" .177
1 7/8" 3 3/4" .1875
1 15/16" 3 7/8" .192
2 1/16" 4 1/8" .207
2 3/16" 4 3/8" .2187
2 1/4" 4 1/2" .2253
2 5/16" 4 7/8" .2343
2 7/16" 4 7/8" .2437
2 1/2" 5" .250
2 5/8" 5 1/4" .2625
2 3/4" 5 1/2" .273
2 13/16" 5 5/8" .283
2 7/8" 5 3/4" .289
2 15/16" 5 7/8" .295
3 1/16" 6 1/8" .3065
3 1/8" 6 1/4" .3125
3 3/16" 6 3/8" .3195
3 5/16" 6 5/8" .331
3 7/16" 6 7/8" .3437
3 5/8" 7 1/4" .3625
3 3/4" 7 1/2" .375
3 15/16" 7 7/8" .3938
4 1/16" 8 1/8" .4062
4 7/32" 8 7/16" .4218
4 5/16" 8 5/8" .4305
4 3/8" 8 3/4" .4375
4 17/32" 9 1/16" .4531
4 5/8" 9 1/4" .4615
4 11/16" 9 3/8" .4687
4 7/8" 9 3/4" .490
5" 10" .500
5 5/16" 10 5/8" .5312
5 5/8" 11 1/4" .5625
6 1/4" 12 1/2" .625

 

Determine the winding of the spring coil. Does it open to the right or the left?wind Measure the inside diameter of the spring. Make sure to measure directly across the center of the spring as shown below.determine sping windFind the Correct wire size.
Using the chart to the left count 10 to 20 coils from your broken spring then measure the size of the 10 or 20 coils that you just counted. refer to the chart on the left to find the correct wire size.lengthFinally, measure the entire length of the broken spring from one end of the spring to the other. Do not measure the cones on the end.

*****Warning****
Installing torsion garage door springs should not be attempted by non garage door professionals . torsion springs and all hardware connected to the torsion system is under extreme tension. If it it not properly released seriously injured or death can result. if you are not a competent do it your selfer please call a professional.
 
   

 

 

 


 
 

 

   
 

Find installation instruction here >>>